" I have my rc210 up and running on Micor repeater and it sounds great." Doug VE5DA      " The RC210 works like a champ ! Great for VoIP linking as all the repeater commands are 'locked' so it's easy to setup IRLP etc without having to … read more Andrew KC2EUS      " [Arcom] has always been "Johnny on the spot" in our dealings. [We] worked through a few documentation issues with the RC210, as I purchased one of the first "kits" available. When I destroyed the ICR the first time around, [Arcom] mailed another one free of charge, with apologies for the documentation mix-up. In my opinion, [Arcom] runs a first class shop. I only wish other vendors were as attentive to the customer as I have found [Arcom] to be.     I have been running my RC210 without problems for several years now receiving many positive comments on the quality of its voice announcements and other features. Several months ago I noticed Ken’s announcement of the new processor as well as the upgrade process. Having the controller in use with two repeaters and an IRLP node, I wanted to get this done yet was concerned about pulling the system down. Ken assured me the smoothest way to do this would be to ship the board back and that he could turn it around in a day! After contemplating, I shot him an email with some other items I had noticed which he assured me he could handle as well in the same timeframe. I packaged the unit, and shipped it overnight. Before the end of the next day I had a call from Ken reviewing what he had done and letting me know he was shipping it back out! I received the unit back and installed it back into the system as if it had never been gone. All programming was in place and all I needed to do was fine tune one POT that had been re-soldiered. The RC210 is a great controller and the after sales service is first rate! Thank you Ken! Keith - AI6BX
Arcom Controllers
  • EEB (External EEPROM Board)

This upgrade provides additional non-volatile memory storage for RC210 pc boards earlier than Version 3.5 and is necessary in order to obtain all the features offered in Firmware 7.39 and later.

This board is easily added to your existing RC210 (soldering required) or you may return your RC210 to us (pc board only and we'll pay for the return shipping).

Note: You must have the new ATMEGA2561 CPU and Firmware 7.39 or later in order to use the addtional memory this option provides

Write a review

Please login or register to review

EEB (External EEPROM Board)

  • Brand: Arcom
  • Product Code: EEB
  • Availability: 1000
  • $25.00


Available Options


Related Products

RC210 Rack Mount Enclosure

RC210 Rack Mount Enclosure

This quality aluminum enclosure for your RC210 fits in a standard 19" rack, taking only 1.75" of val..

$85.00

RC210 Deluxe Repeater Controller

RC210 Deluxe Repeater Controller

The RC210 is a state-of-the-art, fully featured 3 Port repeater controller with features generally f..

$245.00

AP1 Intelligent Autopatch

AP1 Intelligent Autopatch

The AP1 provides all the features you expect in an autopatch, including autodialer, blacklists, reve..

$189.00

ADR Interface

ADR Interface

IMPORTANT The ADR Interface allows the connection of an external repeater controller to the Yaesu D..

$175.00

CPU Upgrade for RC210

CPU Upgrade for RC210

Upgrade the Atmel ATMega128 CPU to the newer ATMega2561 for added features and operatability. Base p..

$40.00

EEB (External EEPROM Board)

EEB (External EEPROM Board)

This upgrade provides additional non-volatile memory storage for RC210 pc boards earlier than Versio..

$25.00

EX1 Port Expander

EX1 Port Expander

The EX1 Port Expander allows you to connect up to 3 additional full-duplex/half-duplex/simplex rad..

$145.00

UFE Extender

UFE Extender

The Arcom UFE allows for the recovery of 32 additional Logic Outputs from the RC210. Each output i..

$49.95