Arcom RCP Programming Software

Why not make it easy on yourself and ease the chore of custom programming your RC210?

Our RCP Programming Software allows RC210 owners to easily and quickly program all the operating parameters of our RC210 Repeater Controller right over the air or by direct connection to the controller.

Version 5.2.5 for use with RC210 Firmware Version 4.74 and later

Click here to see screenshots!

Download the RCP Manual!

Click here to download the RCP installer (ONLY IF YOU HAVE NEVER INSTALLED RCP ON THE COMPUTER YOU WANT TO USE!)

Click here to download RCP UPDATE ONLY (use only if you already have a registered version of RCP and simply want to upgrade to Version 5.2.9)

Our new Data File Converter will automatically convert pre-version 4.5.1 data files to the new format required. YOU ONLY NEED THIS IF YOU HAVE DATA FILES GENERATED BY EARLIER VERSIONS OF RCP (earlier than version 5.0.0).

Click the button below to order your copy of RCP for only $29.95 (IMPORTANT! BE SURE TO FOLLOW THE "Click Here To Continue" LINK AFTER YOU'VE COMPLETED ORDERING! THIS WILL TAKE YOU TO OUR WEBSITE WHERE YOU CAN REGISTER YOUR COPY!)

Features:

You can save multiple databases, each with a different configuration

Programming is accomplished by DTMF or SERIAL PORT connection to allow either direct connection to an RC-210 Port or over the air.

Selectable delay between DTMF digits to accomodate varying RF path quality

Selectable transmit delay, to allow the transmitter to come up to power before sending any DTMF.

Selection of delay time for serial port connections, to accomodate a direct connection or one via packet or dial-up modem.

You can select to either have only those codes/settings that have changed sent to the controller or a complete database "dump"

Download the RC-210's memory to your computer and save to a file.

Immediate setting of the RC-210's clock and calendar, based on your computer's internal system clock

Easy selection of Voice or CW messages by either clicking on a scrollable word list or you may directly type in the values. Also, a counter to keep easy track of how much room you have left. Programming Macros works similarly. Full error checking is incorporated.

Direct upload of wav files to the RC210 DVR for the best possible fidelity

Scheduler programming is a snap, with easy to use drop down selections for Setpoint, Hours, Minutes and Macro to Run.

Courtesy Tone programming is quick and easy to follow

Very easy to use

Runs on Windows 95/98/98SE/NT/2000/XP